Wacker Neuson G 70 Manuel de l'opérateur télécharger pdf (Page 38)

wc_tx003552gb_FM10.fm

Rammer

Operation

4 Operation

4.1 Preparing the Machine for First Use

1. Make sure all loose packaging materials have been removed from the machine.

2. Check the machine and its components for damage. If there is visible damage,

do not operate the machine! Contact your Wacker Neuson dealer immediately

for assistance.

3. Take inventory of all items included with the machine and verify that all loose

components and fasteners are accounted for.

4. Attach component parts not already attached.

5. Add fluids as needed, including fuel, engine oil, and ramming system oil.

6. On rammers with oil injection (BS 50-2i, BS 60-2i, BS 70-2i), visually check the

oil in the oil supply line for air bubbles. If air bubbles exist, purge the oil supply

line before operating the machine. See topic Purging the Oil Lines for detailed

instructions.

7. Move the machine to its operating location.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 85 86

Pas de commentaire

Wacker Neuson G 70 Manuel de l'opérateur Page 38