Wacker Neuson CRT 48-31V Manuel de l'opérateur télécharger pdf (Page 24)

Operation CRT 36

24 wc_tx000639gb.fm

3.2 Position of the Operator

Safe and efficient use of this machine is the operator’s responsibility.

Full control of the machine is not possible unless the operator

maintains the proper working position at all times.

While operating this machine the operator must:

• be seated in the operator’s seat facing forward

• have both feet on the control deck

• have both hands on the controls

3.3 Preparing the Machine for First Use

Preparing for first use

To prepare your machine for first use:

3.3.1 Make sure all loose packaging materials have been removed from the

machine.

3.3.2 Check the machine and its components for damage. If there is visible

damage, do not operate the machine! Contact your Wacker Neuson

dealer immediately for assistance.

3.3.3 Take inventory of all items included with the machine and verify that

all loose components and fasteners are accounted for.

3.3.4 Attach component parts not already attached.

3.3.5 Add fluids as needed and applicable, including fuel, engine oil, and

battery acid.

3.3.6 Move the machine to its operating location.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Pas de commentaire

Wacker Neuson CRT 48-31V Manuel de l'opérateur Page 24