Wacker Neuson CRT 48-31V Manuel de l'opérateur télécharger pdf (Page 42)

Maintenance CRT 48

42 wc_tx000642gb.fm

5.14 Lombardini—Engine Oil and Filter

See Graphic: wc_gr003780

Change oil every 125 hours and oil filter (b) every 250 hours. On new

machines, change oil after first 50 hours of operation. Drain oil while

engine is still warm.

Note: In the interests of environmental protection, place plastic

sheeting and a container under the machine to collect the liquid which

drains off. Dispose of this liquid properly.

To change oil:

5.14.1 Remove oil filler cap (a) and oil drain plug (c). Drain oil into a suitable

container.

5.14.2 Reinstall the drain plug and tighten.

5.14.3 Remove and replace oil filter (b).

5.14.4 Remove oil filler cap (a) and fill engine crankcase with recommended

oil. See Technical Data for oil quantity and type.

5.14.5 Install oil filler cap.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

Pas de commentaire

Wacker Neuson CRT 48-31V Manuel de l'opérateur Page 42