Wacker Neuson CRT 48-31V Manuel de l'opérateur télécharger pdf (Page 23)

CRT 48-31V-ES Operation

wc_tx000143gb.fm 21

4.7 Operation

To utilize your WACKER Riding Trowel to its fullest capacity, the

machine should be driven in the direction that the operator is facing.

This will finish the widest possible area, while giving the operator an

excellent view of the slab surface about to be troweled. When the

machine reaches the end of the slab, make a 180° U-turn, and repeat

the straight line of direction to the other end of the slab.

Note: During the break-in period, run the engine at 50% of full throttle.

Refer to Section New Machines.

NOTICE: DO NOT use excessive pressure on the control levers.

Excessive pressure does not increase the reaction time of the machine

and can damage the steering controls.

NOTICE: Attempting to use the trowel too early in the curing stage of

the concrete may result in an undesirable finish. Only experienced

concrete finishers should operate the trowel.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Pas de commentaire

Wacker Neuson CRT 48-31V Manuel de l'opérateur Page 23