Wacker Neuson CRT 48-31V Manuel de l'opérateur télécharger pdf (Page 31)

CRT 48-31V-ES Maintenance

wc_tx000144gb.fm 29

5.4 Mounting Float Pans

See Graphic: wc_gr000275

Certain applications may require the use of float pans. Optional float

pans (a) are available, and are used with the machines in the non-

overlapping configuration only.

To mount float pans:

Lift trowel off the ground with the engine off and position the pan

against the blades. Turn pan either to the right or left to engage clip

angles (b) as shown. Remember, the right-hand trowel blades turn

counterclockwise; the left-hand blades turn clockwise.

5.5 Transporting Trowels

See Graphic: wc_gr000697

To lift the trowel with a fork lift:

Fork lift pockets (a) are provided on both the front and back of the

machine. Carefully run the fork lift’s forks into either set of fork lift

pockets.

To hoist the trowel:

Attach a sling or chains through the lifting bars (b) on each side of the

seat pedestal.

NOTICE: Make sure the lifting device has enough weight-bearing

capacity to lift machine safely. Refer to Section Technical Data.

DO NOT lift the trowel by the guard rings or any part of the trowel other

than the lifting fixture, as the component may fail, causing the trowel to

fall, possibly injuring bystanders.

WARNING

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Pas de commentaire

Wacker Neuson CRT 48-31V Manuel de l'opérateur Page 31