Wacker Neuson GP 3800A Manuel de l'opérateur télécharger pdf (Page 16)

GP 3800A

16 wc_si000555gb.fm

— DANGER!

 Read the Operator’s Manual.

 No sparks, flames, or burning objects near

the machine.

 Stop the engine before refueling.

—

GFCI TEST INSTRUCTIONS - TEST BEFORE EACH USE

Normal operating state - sensing device green LED is "ON" and circuit breaker is at "ON" position.

Step 1: Press "TEST" button. Green LED should go "OUT" and red LED should come "ON" and

circuit breaker should trigger to "OFF" position.

Step 2: If sensing device LED or breaker does not trip or change state, "DO NOT USE". Consult

an electrician for assistance.

Step 3: Press "RESET" button. Red LED should turn "OFF" and green LED should turn "ON".

Step 4: Manually reset (switch) circuit breaker to "ON" position to restore circuit power.

—

CAUTION!

Use only clean, filtered gasoline fuel.

Check the fuel level.

—

Open the fuel flow valve.

—

Close the choke.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 57 58

Pas de commentaire

Wacker Neuson GP 3800A Manuel de l'opérateur Page 16